ok folks... Superlift came out with a 3" lift for us.  not keys but a real lift.  Heres the details.....

System height adjusts from 2" to 3.5" while unique adjustable compression travel-stops allow you to tune vehicle ride and handling characteristics

Pickup rear lift options include 1.5", 2", 2.5" and 3.5" rear blocks, or 2" add-a-leafs. .75" tall coil spacer available for SUVs

Both upper and lower control arms are lowered to ensure that proper alignment remains constant throughout the suspension travel cycle

Lower control arm brackets are full-width, one-piece crossmembers

Differential is lowered to optimize CV axle operating angles and service life

Dropped centerlink, with stabilizing link, corrects tie-rod geometry

Superlift Superide shocks (gas front, hydraulic rear) available. On models factory-equipped with Autoride electronic shocks or rear Air-Ride shocks, relocation brackets allow factory shocks to be retained

TruSpeed speed sensor calibrator available

Limited Lifetime Warranty

 

 

 

heres the instructions.,.....  http://www.superlift.com/instructions/3360.pdf

 

 

interesting... Front kit looks like the 6inch kit with out the Knuckles to go the extra 2 inches... Very cool!!!! Good work!!!

What I would like to see is a kit with 2-3 inch lift knuckles and new Extreame angle CV's, My turbos crossover pipe is right where the front drive shaft would go when the front end gets dropped down with these types of lifts. I am not about to modify the crossover pipe, that would affect other things down there then too... Besides, I only want/need about 3 more inches of height on my truck...

Your mission Bonedog should you choose to accept it, is to find me that and I WILL buy it (providing it is not overly priced LoL)...

you mean this...  http://www.avowners.com/forum.idc?show=forum_posts&TID=2 720&PN=1&TPN=1

your wish is my command